Steampunk selection of dxf format CNC files for plasma or laser cutting on CD

Description

.dxf format artwork for CNC plasma cutting (or high power laser)
This CD contains a selection of our most popular Steampunk cutting files.
This listing is for the CD. Photos of completed items are for informational purposes only.
The lamp(s) require assembly and additional parts. After purchase we will provide
a detailed list of common lamp parts required to finish plus detailed
assembly instructions, photos, and drawings.
Drawn at high resolution.  The CD
Includes:
Desk lamp
Welding required.
Requires miscellaneous hardware.
Sample item pictured was made from
1/4 and 1/8 inch
mild steel.
Yes, it will function mechanically...turn the handle and the gears turn to adjust the position.
Flip the giant lever to turn the lamp off and
on (uses a standard wall switch hidden under the steel lever). We will provide
instructions for help with assembly.
Giant floor lamp
Welding required.
Requires miscellaneous hardware.
Sample item pictured was made from
1/4, 3/16, and 1/8 inch mild steel.
Yes, it will function mechanically...turn the handle and the gears turn to adjust the position.
Requires a few short sections of common tubing to complete.
NOTE: A 'washer' is only drawn once in the layout, but you'll
need to cut several of them. We will provide instructions for help with assembly.
Single wall switch
Requires 1/4 inch thick material ('gasket' is best in 1/8). F
its over standard USA wall switches.
We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt.
Double wall switch
Requires 1/4 inch thick material ('gasket' is best in 1/8). F
its over standard USA wall switches.
We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt.
Triple wall switch
Requires 1/4 inch thick material ('gasket' is best in 1/8). F
its over standard USA wall switches.
We used a common door hinge pin with a cotter key. Optionally, you can just use a nut and bolt.
Single switch with outlet
Requires 1/4 inch thick material ('gasket' is best in 1/8). F
its over standard
USA wall switches.
Uses a common USA double outlet.
We used a common door hinge pin with a cotter key.
Optionally, you can just use a nut and bolt.
Steampunk table (short)
GEAR top is is 23.4 inches. LEGS are 18 inches tall.
Requires some welding.
Requires misc hardware.
Designed for 1/4 inch material.
Steampunk table (tall)
GEAR top is is 23.4 inches. LEGS are 41.75 inches tall.
Requires some welding.
Requires misc hardware.
Designed for 1/4 inch material.
Selection of Ste
ampunk style gears. Style "A".
Scale up or down to required size.
Cut from any thickness.
Selection of Ste
ampunk style gears. Style "B".
Scale up or down to required size.
Cut from any thickness.
Selection of Ste
ampunk style gears. Style "Gevea Gears".
Scale up or down to required size. Cut from any thickness.
This is all original artwork created by Fred Nelson Fabrication and we
legally
own the content (sometimes called intellectual
property). You are welcome
to make and sell physical items from the digital files however, the f
iles themselves
are not intended for distribution or re-sale and may not be copied, duplicated, or
transmitted in any way.  Buyer agrees not to copy or distribute the electronic files.
Produced by Fred Nelson Fabrication.
All rights reserved.